Size 1 Rubber Stoppers with 1 hole are Tapered Rubber Stoppers that will plug bottles, lab vials and other openings. Manufactured from EPDM Rubber. Not for food or beverage packaging applications.
#1 Stopper w/ one hole
Excellent sizing, quality and shipping
Otis G., West Columbia, SC - 11/22/2021
These are amazing in you want to make DIY finials from cabinet knobs!
I am on a tight budget & made a curtain rod out of electrical conduit, but needed to get finials to finish it off. Was unable to find a good easy inexpensive solution on line.
Found the site, the #1 stopper can be painted w/ Zinzer primer then painted any color you like. 1.5" screws will go thru the hole to tightly fasten your cabinet knobs. Thank you again for this wonderful product!
L, San Marcos, TX - 1/7/2021
These worked great for my alternative use!
I actually bought these rubber stoppers to fill in as rubber feet for a metal wire plant stand I own. I had searched every where and just hoped they would work. The hole while tight, stretched to fit the legs on my table and they look great.
Marsha S, Kentucky - 11/1/2020
Widgetco was fast and 100% correct in getting my order to me!
Imre, Sunnyvale CA - 10/29/2020
Just as ordered
SteveM, 5 Stars - 9/19/2020
I screwed these onto some exposed #12 screw ends to protect people from gouging themselves on the screw ends. Worked great! Just screw them on by hand -- no tool needed.
Bob B, Florida - 7/27/2020
Really fast shipping great products.
Frank C, Memphis, TN - 7/9/2020
Rubber Stoppers with 1 hole are Tapered Rubber Stoppers that will plug bottles, lab vials and other openings. Manufactured from EPDM Rubber.
Excellent quality and range of rubber products WidgetCo. So far, I have purchased different sizes of Silicone rubber stoppers for my water bottles and 1 hole rubber stoppers . I have been completely satisfied with both the quality of the products and the service. To my greatest surprise, my latest order arrived two days post ordering. My suggestion, and I believe would be great for both WidgetCo, present customers and potential customers, is to allow folks to post descriptions and pictures of unique applications of products. I am certain that there are many unique applications for the several unique products offered by WidgetCo.
Peters, D, Texas - 6/13/2019
The product and the delivery were great.
Bruce C, Muncie, IN - 2/12/2019
Received product faster than expected and worked great
Mike M, New Jersey - 8/12/2018
Rubber Stoppers WITH hole
I’m an “Air Balance Tech” (I know, you don’t know what Air Balance is.... but you can’t open a commercial building without an Air Balance Report).
We have to certify the smoke detectors on the return system of the Ductwork.
The port where we measure static air pressure has an I.D. Of about ½”. These #1 stoppers fit in perfect. Then, I cut ¼” aluminum tube, 2” long and cram it in the 5/32 hole.
They work PERFECTLY.
Kenny Bergquist, Monterey, CA - 7/24/2018
Just what i wanted.
Charles D, La Grange, TX - 7/17/2018
Great service, great price, fast shipping! These rubber stoppers are just like the ones from chemistry class.
Stu M, Florida - 3/24/2018
I actually purchased this to modify a flute so that it would accept an oboe reed. Great idea, but unfortunately didn't work! I received it promptly and it was exactly right. Good company.
Deb D, Arizona - 11/21/2017
I ordered Number 1 Rubber Stoppers with a hole. Order placement was easy, Feedback was good, e-mail that order was received, e-mail when shipped and when charged. Order came by USPS and delivery was prompt.
David C, USA - 10/12/2017
The rubber stopper with a hole drilled vertically with 1/2" diameter on one end of the stopper and 3/4" on the other end of the stopper saved me $50 plus dollars. I needed vented gasoline 2" plug/bung covers for 55 gallon storage containers. The vented caps were $8.95 a piece plus shipping. I drilled a 1/2" hole in the existing caps I had and placed the rubber stopper in the drilled hole to vent the cap. I can plug and unplug the rubber stopper hole for storage or transport. First class product.
Bob B., Lutherville MD - 7/18/2017
I placed an order with WIDGETCO, they filled it the same day and 2 days later it was in my mail box. Just does not get any better! Great company to deal with.
Buck Sisson, Washington - 8/19/2016
Unique Use for Stoppers
Shipping was fast, and the product was exactly what I needed. I would order from these folks again. Am using these stoppers for a polishing and grinding mandrel. Works great.
Ross S., USA - 3/12/2016
I received my order in a reasonable amount of time and I am satisfied with the product, cost, etc. I had some difficulty making use of the 22 character tracking number, but it wasn't a big thing...
Todd D, New Hampshire - 10/2/2015
Special Stopper Needed
I found the exact size stopper I needed after looking in local stores to no avail. Seems online selection simply cannot be achieved with walk in stores. Order was quick, accurate and shipping was fast. Probably spent more on gas and time looking locally before I ordered.
Ron P, California - 9/18/2015
Chen H., Rolla, MO - 8/18/2015
Just what I was looking for.
I used these for centering bulk fishing line spool.
Charlie W., USA - 6/2/2015
Product is just as described with very fast shipping. Shopping at WIDGETCO was a great experience
Don F., Missouri - 8/25/2014
Super fast shipping.
Josh, Erie, PA - 3/9/2014
Great shipping and exactly what I ordered. Excellent product
Barry R, Chicago, IL - 3/6/2014
I have tried all the products I ordered and they work great. I received my order very quickly. I am Legally Blind and use the stoppers for the tops of my white canes. I have also fitted some on my friends canes as well. Thank You again for your products.
Tom P., Placerville, CA - 9/16/2013
Great service, fast shipping, A+ products. Thanks.
Craig G, Hood River, OR - 8/17/2013
Great product, great fast service, and would not hesitate to use your company again. You don't find service like this much anymore.
Steve G, Milwaukie, OR - 8/2/2013
Bought these to replace a stopper on a hummingbird feeder - they arrived quickly and are just what we needed. Thanks
Cary L., Columbia SC - 6/16/2013
#1 Stopper hole size
I have many stopeprs with 1 hole and thought this hole size would be the same. It was too small for my application.
[Reply from WIDGETCO: Please note, our holes are all 5mm (3/16"). Please feel free to return the parts for a full refund.]
Bob S, Cary, NC - 4/19/2013
A pleasure doing busines with ya'll.
Matt, USA - 4/3/2013
Good find but not so fast
I thought I found the product that I have been looking for for a long time, so I ordered a sample before ordering big. It turned out that the hole diameter is not what is stated as product description. The hole is not 3/16" it is less than 5/32". WIDGETCO was good they refunded me immediately and apologized. Too bad I need 2000 of this.
[Reply from WIDGETCO: Thank you for the feedback, the holes should indeed be 3/16" and that is what the tooling pins are, so we will look into this report.]